1 Raspberry Pi - How to use the GPIO
An early beginner tutorial on lighting LEDs and reading buttons from Raspberry Pi GPIO pins with the RPi.GPIO Python library.
Topic
12 videos. Ranked by independent recommendations, not by views.
An early beginner tutorial on lighting LEDs and reading buttons from Raspberry Pi GPIO pins with the RPi.GPIO Python library.
Big Clive demonstrates several ways to run an LED as a mains indicator on 120 V and 230 V, recommended when resistor-only circuits overheat or reverse voltage harms the LED.
DIY Perks builds a bright battery-powered LED panel for video work; people copy the design and ask how its potentiometer and resistor set the converter's output range.
A beginner tutorial on wiring an LED to Raspberry Pi GPIO pins and controlling it from Python, typical of what newcomers are pointed to first.
An LED cube showcase linked as an example of Arduino cube projects; one commenter suggests it may be too complicated for a first project.
Shown as an eye-catching Arduino demonstration of LEDs reacting to touch and movement, and cited as a practical example of an infrared sensor array.
Shows that an ordinary LED can double as a crude light detector, a trick people cite often, with the caveat that it needs plenty of light.
Builds a pulsing, fading LED circuit around a 555 timer; people follow it for small lighting projects and adapt the component values to their own LEDs and supply.
Offered to newcomers as a first Arduino exercise, wiring a simple LED circuit on a breadboard with jumper leads from an Uno.
A circuit puzzle with three LEDs that behave unexpectedly, shared for people to work out how the effect is produced.
Opens Ben Eater's digital electronics series by varying the voltage across an LED to show its forward voltage and current behaviour; suggested to beginners puzzled by LEDs.
Ben Eater builds the 74LS189 RAM module for his 8-bit computer; often cited in questions about the chip heating and LEDs driven without resistors.