1 EEVblog #388 - Fake Apple USB Charger Teardown
Dave Jones tears down a counterfeit Apple USB charger and shows its poor mains isolation; cited in discussions of cheap chargers and the shock risk they carry.
Topic
19 videos. Ranked by independent recommendations, not by views.
Dave Jones tears down a counterfeit Apple USB charger and shows its poor mains isolation; cited in discussions of cheap chargers and the shock risk they carry.
Big Clive opens a cheap eBay 25A solid state relay and finds a triac rated well below the label; cited when people ask what is inside these SSRs.
Mehdi Sadaghdar opens a plug-in electricity saving box and shows why it cannot cut a household bill; the standard link whenever someone asks whether these devices work.
A teardown and analysis of a cheap USB power supply, cited when people ask how to test chargers and whether bargain units are safe.
A teardown of a dangerous cheap USB charger, cited whenever someone asks why bargain mains adapters are worth avoiding.
Big Clive tears down a camping light whose capacitive dropper can leave its USB port at mains potential; cited as a vivid example of unsafe cheap design.
Big Clive's teardown of a mains LED lamp, cited to show how the bulb's driver and LED string are arranged and what voltages the LEDs run at.
Applied Science explores how e-ink displays work internally while pushing their refresh rate, cited for understanding the panels before driving one yourself.
An EEVblog teardown of a Rigol oscilloscope, cited for details of its internals such as the switching supply, relay count and build quality.
An EEVblog teardown of a programmable bench power supply, cited for its remote interfaces and a note on tinned exposed traces for current.
A spectrum analyser teardown linked for one memorable section where unusual RF construction baffles even the presenter.
Dave Jones tears down a Hakko FX-888 soldering iron and modifies its indicator LED, giving a look at build quality along the way.
Big Clive takes apart an arc lighter and draws out its circuit, cited for the schematic and estimated electrode voltage.
Big Clive examines some USB power supplies and finds poor isolation, used to show how a mains charger can fall short on safety.
Ben Krasnow explains how a mercury coulometer hour meter works, linked whenever someone finds one of these unusual elapsed time indicators in old equipment.
BigClive opens a lithium jump starter power bank, estimating its peak current with improvised methods and showing cable and cell resistance effects in practice.
An electronupdate teardown that decaps a Raspberry Pi's BCM2835 and inspects the board's power supply parts, cited for low level hardware details.
Shared as a cautionary teardown showing cheap circuit breakers with no real trip mechanism inside, used to warn against unbranded safety parts.
EEVblog tears down the Rigol DS1052E oscilloscope, cited for what it reveals about the hardware, including the overclocked ADC parts inside.